Ceramic Alumina Parts
Features of the ceramics parts:
1) A variety of specifications available.
2) Satisfy various technical request
3) Lower medium spoilage
4) Good insulation performance and high temperature resistance
5) High strength
6) Used in all electric products, electric heating products and wear resistant machinery parts.
7) OEM, ODM and OBM are welcomed
Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, 200T isostatic pressing and extrusion productive technology etc.
Main performance index about alumina ceramic parts :
Features of the ceramics parts:
1) A variety of specifications available.
2) Satisfy various technical request
3) Lower medium spoilage
4) Good insulation performance and high temperature resistance
5) High strength
6) Used in all electric products, electric heating products and wear resistant machinery parts.
7) OEM, ODM and OBM are welcomed
Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, 200T isostatic pressing and extrusion productive technology etc.
Alumina Ceramic Part Application:
- Furnace process tubes
- Steel tube liners
- Coal handling wear resistance pads
- Thermocouple protection tubes
- Sandblasting nozzles
- Wire drawing dies
- Bushings and caps
- Crucibles
- Tool bits
- Saggers
- Kiln furniture
- Mechanical seals
- Fuel cell parts
- Rollers for hearth furnaces
- Welding nozzles
- Laser parts
- Gas igniters
- Electric insulator
- Ceramic guiders
- Ceramic screwdrivers
- Zirconia oxygen Sensors
- Medical and surgical components
Main performance index about alumina ceramic parts :
| Project | Test the condition | Unit | 99 porcelain | 95 porcelain | Talc porcelain | |
| Backbone | 99%AL2O3 | 95%AL2O3 | MgO.SiO2 | |||
| Physical property | Density of volume | Normal atmospheric temperature | g/cm3 | 3.8 | 3.6 | 2.8 |
| Airtight | Normal atmospheric temperature | . | .Pass | Pass | - | |
| Absorbing water rate | Normal atmospheric temperature | % | 0 | 0 | 0 | |
| Temperature that frit | °C | 1800 | 1650 | 1350 | ||
| Mechanical performance | Rockwell hardness | Normal atmospheric temperature | HRA | 88 | 86 | 76 |
| Resist the intensity of turning back | Normal atmospheric temperature | Mpa | 350 | 320 | 150 | |
| Compression strength | Normal atmospheric temperature | Mpa | 1300 | 1200 | 900 | |
| Hot performance | Use temperature at most | °C | 1700 | 1600 | 1200 | |
| Heat resistant shaking | 20O°C-1100O°C | 10Num | Pass | Pass | Pass | |
| Hot coefficient of expansion | 20O°C-80O°C | ×10-6mm/°C | 6.5-8.5 | 6.5-8.0 | 5.0-6.2 | |
| Heat-conduction rate | 25°C | W/m.k | 29 | 25 | 2.9 | |
| 300°C | W/m.k | 18 | 13 | 2 | ||
| Dielectric constant | The medium lossing | 1MHz2O°C | ×10-4 | ≤2.5 | ≤4 | ≤8.0 |
| The angle tangent is worth | 1MHz8O°C | ×10-4 | ≤3.5 | ≤4.2 | - | |
| Dielectric strength | Normal atmospheric temperature | KV/mm | 15 | 16 | 20 | |
| Dielectric constant | 1MHz2O°C | 9-10.5 | 9-10 | ≤7.5 | ||
| Resistivity of volume | 2O°C | Ω.cm | >1012 | >1012 | >1013 | |
| 10O°C | Ω.cm | 1012-1013 | 1012-1013 | 1010-1011 | ||
| 30O°C | Ω.cm | >1012 | 3.1×109 | 5×108 | ||